1、针对不良品样品分析，线包断开明显，线圈中断处蓬松散乱，以此判断：由

1、针对不良品样品分析，线包断开明显，线圈中断处蓬松散乱，以此判断：由于线圈松散碰触到转子，转子旋转擦断线圈出现不良。2、产生以上问题原因为生技人员在调机时未调试好张力导致线圈松散，且定子压合工位人员未检查线圈是否超出绝缘架，导致不良流出。<br>3、线圈圈数多，线架低，导致线圈超出绝缘架。

1、针对不良品样品分析，线包断开明显，线圈中断处蓬松散乱，以此判断：由于线圈松散碰触到转子，转子旋转擦断线圈出现不良。 2、产生以上问题原因为生技人员在调机时未调试好张力导致线圈松散，且定子压合工位人员未检查线圈是否超出绝缘架，导致不良流出。<br>3、線圈圈數多，線架低，導致線圈超出絕緣架。

1. According to the analysis of the samples of the defective products, the disconnection of the wire bundle is obvious, and the coil interruption is loose and scattered, so as to judge that the rotor rotating friction coil is defective due to the loose contact of the coil with the rotor. 2. The above problems are caused by the looseness of the coil caused by the failure of the production technicians to adjust the tension during the machine adjustment, and the failure of the stator pressing station personnel to check whether the coil is beyond the insulating frame, resulting in the outflow of the defective products.<br>3. The number of coils is too many and the wire frame is too low, which causes the coil to exceed the insulating frame.<br>