主要有机架、偏心轴、动颚座、固定颚板座、调整偏心轴、衬板等组成 ；由电

It is mainly composed of a frame, an eccentric shaft, a movable jaw seat, a fixed jaw plate seat, an adjustment eccentric shaft, a lining plate, etc.; the motor drives the eccentric shaft to rotate through a pulley, and the movable jaw base follows the adjusted trajectory along with the eccentric shaft During the movement, it drives the moving jaw plate and collides with the fixed jaw plate on the opposite fixed jaw plate seat to crush the materials in the crushing cavity according to the required requirements. <br>The size of the discharge port is adjusted by adjusting the adjustment seat on the eccentric shaft, so as to achieve the desired particle size.

There are mainly rack, eccentric shaft, moving jaw seat, fixed jaw plate seat, adjustment eccentric axis, liner, etc. , by the motor through the wheel to drive the eccentric axis rotation, the moving jaw seat with the eccentric axis according to the adjusted track movement when driving the movement of the moving jaw plate movement, and with the relative fixed jaw plate on the fixed jaw plate collision squeeze, so that the material in the crushing cavity according to the required requirements to be crushed.<br> The size of the drain port adjusts the position of the eccentric axis by adjusting the adjustment seat on the eccentric axis to achieve the desired granularity.

It mainly consists of frame, eccentric shaft, movable jaw seat, fixed jaw seat, adjusting eccentric shaft, lining plate, etc.; the motor drives the eccentric shaft to rotate through the pulley, and the movable jaw seat drives the movable jaw plate to move with the eccentric shaft according to the adjusted track, and collides with the fixed jaw plate on the opposite fixed jaw seat, Thus, the materials in the crushing chamber are broken according to the requirements.<br>The size of the discharge port is adjusted by the adjusting seat on the eccentric shaft to adjust the position of the eccentric shaft, so as to achieve the required particle size.