*Start-up• Insert the connection he

*Start-up• Insert the connection head of the suction hose into the hose connector (10) until it locks in place. To do so, please press the buttons simultaneously. In order to release the hose again, please press the buttons once more on the connection head.• Keep the buttons pressed down and then pull out the hose.• Please attach the telescopic suction tube to the grip end (see section" Suction Tube").• Then assemble the floor nozzle and/or the accessories.* Using the Appliance1. Unwind the length of cable you require.2. Insert the mains plug into a correct socket. Turn on the device with the on/off switch (1) by pushing it downwards.3. Adjust the suction power by turning the suction power regulator (6).4. Vacuum at a steady speed. There is no need to exert pressure.5. Attention: pay attention to the range that can be covered with the cable length.* Vacuum power regulatorLow vacuum power: For curtains and delicate fabricsMedium vacuum power: For long-pile carpets and textile flooringHigh vacuum power: For sturdy rugs and floors* Telescopic Suction Tube:1. This makes it possible to adapt the height to your individual body size. Unlock the coupling by turning the wide section of the suction tube to the left.2. Move the suction tube as required. To lock the coupling, turn the wide suction tube to the right.