自动控制———将灭火控制器上的控制方式选择键置于“自动”位置。当保护区

--- automatic control of the control mode selection key on the fire controller placed in the "automatic" position. When the fire detector fire alarm issued protected area, alarm control panel automatically audible alarm, command also issued linkage, to close the interlock device (e.g., closed ventilation and air conditioning, fire shutter doors, etc.), through a preset delay 30 seconds when the time to start fire suppression system output signal, the electromagnetic driving gas bottle group protected area corresponding to the opening, starting after the gas release and open the appropriate selector valve extinguishing agent storage bottle, the release of the extinguishing agent, fire embodiment. <br>--- Manual control of the control mode selection key on the fire controller to "manual" position. When the fire detector protected areas send out a fire signal, alarm control panel automatically audible alarm, and outputs the linkage orders closing related equipment (such as closing ventilation and air conditioning, fire shutter doors, etc.), but does not output enable extinguishing system signal, after this time need to confirm a fire, the fire fighting staff on duty manually pressing the button on the controller, or emergency start button outside the protected area, according to the automatic driving program to open the gas bottle group and extinguishing agent storage bottle, releasing extinguishing agent Extinguishing.

The automatic control ——— put the control selection key on the fire control controller in the "automatic" position. When the fire detector in the protected area sends a fire signal, the alarm control panel automatically emits a sound and light alarm, and at the same time issues a linkage command, the interlocking equipment (e.g. off ventilation and air conditioning, fire curtain door, etc.), after a pre-set 30-second delay time, the output startfire system signal, so that the corresponding protected area electromagnetic ally gas bottle group open, After the start of the gas release to open the corresponding selection valve and fire extinguishing agent storage bottle, release the fire extinguishing agent, the implementation of the fire extinguishing.<br>The manual control ——— place the control selection key on the fire control controller in the "manual" position. When the fire detector in the protected area sends a fire signal, the alarm control panel will automatically issue a sound and light alarm, and at the same time issue a linkage command, off the relevant equipment (such as closing ventilation and air conditioning, fire curtain door, etc.), but will not output the start of the fire extinguishing system signal, at this time need to be confirmed by the duty personnel, press the manual button on the fire control controller, Or the emergency start button outside the protected area, you can open the drive gas bottle set and fire extinguishing agent storage bottle according to the automatic procedure, release the fire extinguishing agent, the implementation of the fire extinguishing.

Automatic control - set the control mode selection key on the fire extinguishing controller to the "automatic" position. When the fire detector in the protection area sends out a fire signal, the alarm control panel will automatically send out an audible and visual alarm, and at the same time send out a linkage command to close the interlocking equipment (such as closing the ventilation and air conditioning, fire shutter door, etc.), after the preset 30 After the second delay time, output the signal of starting the fire extinguishing system, so that the electromagnetic driving gas bottle group in the corresponding protection area can be opened. After the starting gas is released, open the corresponding selection valve and the fire extinguishing agent storage bottle, release the fire extinguishing agent, and implement the fire extinguishing.<br>Manual control - set the control mode selection key on the fire extinguishing controller to the "manual" position. When the fire detector in the protection area sends out a fire signal, the alarm control panel will automatically send out an audible and visual alarm, at the same time, it will send out a linkage command to close the relevant equipment (such as closing the ventilation and air conditioning, fire shutter door, etc.), but it will not output the signal to start the fire extinguishing system. At this time, after the shift personnel confirms the fire, press the manual button on the fire extinguishing controller, or the emergency outside the protection area Start the button to open the driving gas bottle group and the fire extinguishing agent storage bottle according to the automatic program, release the fire extinguishing agent and put out the fire.