板材送进夹钳装置的作用是夹住工件的侧面，工件放在辊子上，夹钳夹住工件，

The function of the sheet feeding into the clamp device is to clamp the side of the workpiece, the workpiece is placed on the roller, the clamp clamps the workpiece, drags the workpiece forward, and sends it to the host for punching processing. In general, multiple clamps are used to clamp the plate together, and the clamp mouth extends into the side of the plate 20-30mm to clamp. Many clamps are arranged side by side on the flat plate, there are slide rails under the flat plate, and the gears and racks are driven by the motor to drive the flat plate to run on the slide rails. The clamping force of the clamp is clamped by the oil cylinder, which is a single-acting oil cylinder, that is, the oil cylinder spring is used for resetting. The expansion and contraction of the clamp adopts the locking cylinder of SMC Company. This cylinder can stop the locking piston at any position on the stroke, so that the clamp does not move

The role of the plate into the clamp device is to clamp the side of the workpiece, the workpiece is placed on the roller, the clamp clamp clamps the workpiece, drag the workpiece forward, sent to the host for punching processing. In general, the use of multiple clamps to clamp the plate together, clamp stoist into the side of the plate 20-30mm, you can clamp. Numerous clamps are discharged on the plate, which has a rail under the plate, which is driven by a motor gear and racks to drive the plate on the rail. The clamp clamping force is clamped by the cylinder, the cylinder is a single-acting cylinder, i.e. the re-re-position uses the cylinder spring. Clamp telescopic using SMC's locking cylinder, which stops locking pistons in any position on the stroke so that the clamps do not move

The function of the plate feeding clamp device is to clamp the side of the workpiece, place the workpiece on the roller, clamp the workpiece, drag the workpiece forward, and send it to the main machine for punching. In general, a plurality of clamps are used to clamp the plate together, and the clamp mouth extends to the side of the plate for 20-30mm to clamp. Many clamps are arranged on the flat plate, under which there is a slide rail. The motor drives the gear and rack, which can drive the flat plate to run on the slide rail. The clamping force of the clamp is clamped by the oil cylinder, which is a single acting oil cylinder, i.e. the spring of the oil cylinder is used for resetting. SMC locking cylinder is used for the expansion and contraction of the clamp, which can stop locking the piston at any position on the stroke, so that the clamp does not move<br>