Process action decomposition of rotating mechanism:.1. Turn the drum b的简体中文翻译

Process action decomposition of rot

Process action decomposition of rotating mechanism:.1. Turn the drum body and drum core: the drum core is fixed on the spindle, the cigarette circulation mechanism of power by the main drive shaft to the drum core 7, 2, 7 and sector gear drive drum core turn to 3, 4 and gear installed on the drum core 7 hand 5 clockwise, to detect moving smoke source to different section wheel..2. Rotate the hand rotation: fix the cylindrical CAM 1 on the car body, as the rotation of the drum core roller CAM 1 movement of the slots, drive the sector gear rotating, again through the mesh with the pinion shaft pass motion to rotate your hand, to make it back and forth, swing Angle is 180 °, so as to achieve in turn transfer the cigarettes to detect wheel. The purpose of the.3. Telescopic hand swing: disk CAM 6 is fixed on the body.. With the rotation of the drum core, the drum moves in the groove of the disk CAM, so that the telescopic hand 5 and the drum core rotate clockwise, and swing back and forth at the same time, so as to achieve the function of conveying flue gas.For the above three process actions, the negative pressure required by the suction jaw is provided by the vortex suction nozzle fan alone. The actions of the suction nozzle and the exhaust nozzle are relatively simple, so it is not considered for the moment. Therefore, in the motion scheme design of smoke filter rotating mechanism, the choice and design of two mechanisms should be considered, that is, the telescopic moving mechanism and the rotating moving mechanism.
0/5000
源语言: -
目标语言: -
结果 (简体中文) 1: [复制]
复制成功!
旋转机构的过程动作分解:<br>1.转动鼓体和鼓芯:将鼓芯固定在心轴上,香烟循环机构的动力由主驱动轴驱动,将鼓芯7、2、7和扇形齿轮带动鼓芯转动至3、4并将齿轮顺时针方向安装在鼓芯7的手5上,以检测将烟雾源移动到不同的分段轮<br>。2.旋转手的旋转:将圆柱CAM 1固定在车体上,作为鼓芯滚子CAM 1的旋转插槽的运动,带动扇形齿轮旋转,再通过小齿轮轴与啮合网通过运动来旋转您的手,使其来回摆动,摆动角度为180°,从而实现了转香烟检测轮。目的。<br>3.伸缩手摆动:将磁盘CAM 6固定在主体上。随着鼓芯的旋转,鼓在磁盘CAM的凹槽中移动,从而使伸缩手5和鼓芯顺时针旋转并摆动同时来回移动,以实现烟气的输送功能。<br>对于以上三个过程动作,吸口所需的负压仅由涡流吸嘴风扇提供。吸嘴和排气嘴的作用相对简单,因此暂时不考虑。因此,在烟雾过滤器旋转机构的运动方案设计中,应考虑伸缩运动机构和旋转运动机构这两种机构的选择和设计。
正在翻译中..
结果 (简体中文) 2:[复制]
复制成功!
Process action decomposition of rotating mechanism:.<br>1. Turn the drum body and drum core: the drum core is fixed on the spindle, the cigarette circulation mechanism of power by the main drive shaft to the drum core 7, 2, 7 and sector gear drive drum core turn to 3, 4 and gear installed on the drum core 7 hand 5 clockwise, to detect moving smoke source to different section wheel..<br>2. Rotate the hand rotation: fix the cylindrical CAM 1 on the car body, as the rotation of the drum core roller CAM 1 movement of the slots, drive the sector gear rotating, again through the mesh with the pinion shaft pass motion to rotate your hand, to make it back and forth, swing Angle is 180 °, so as to achieve in turn transfer the cigarettes to detect wheel. The purpose of the.<br>3. Telescopic hand swing: disk CAM 6 is fixed on the body.. With the rotation of the drum core, the drum moves in the groove of the disk CAM, so that the telescopic hand 5 and the drum core rotate clockwise, and swing back and forth at the same time, so as to achieve the function of conveying flue gas.<br>For the above three process actions, the negative pressure required by the suction jaw is provided by the vortex suction nozzle fan alone. The actions of the suction nozzle and the exhaust nozzle are relatively simple, so it is not considered for the moment. Therefore, in the motion scheme design of smoke filter rotating mechanism, the choice and design of two mechanisms should be considered, that is, the telescopic moving mechanism and the rotating moving mechanism.
正在翻译中..
结果 (简体中文) 3:[复制]
复制成功!
旋转机构的过程作用分解:。<br>一。转动鼓体和鼓芯:鼓芯固定在主轴上,烟支循环机构的动力由主传动轴向鼓芯7、2、7和扇形齿轮驱动,将鼓芯转动至3、4和齿轮顺时针安装在鼓芯7、5上,以检测移动的烟源到不同截面的车轮上。。<br>2。旋转手旋转:将圆柱凸轮1固定在车体上,随着滚筒芯辊凸轮1的旋转槽的移动,带动扇形齿轮旋转,再通过与小齿轮轴啮合的通孔运动使手旋转,使其前后摆动,摆动角度为180度,从而实现依次将烟支转移到探测轮子。的目的。<br>三。伸缩式摆臂:盘形凸轮6固定在机体上。。随着筒芯的转动,筒体在盘形凸轮的槽内移动,使伸缩手5和筒芯顺时针转动,同时来回摆动,从而达到输送烟气的功能。<br>对于上述三个过程动作,吸入口所需的负压仅由涡流吸入喷嘴风机提供。吸气嘴和排气嘴的作用相对简单,暂不考虑。因此,在烟气过滤器旋转机构的运动方案设计中,应考虑两种机构的选择和设计,即伸缩运动机构和旋转运动机构。<br>
正在翻译中..
 
其它语言
本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.

Copyright ©2024 I Love Translation. All reserved.

E-mail: