天线贴付取图1的无线天线，撕除天线左侧的离型纸，将天线金手指端沿着下壳

Antenna paste <br><br>Take the wireless antenna shown in Figure 1, remove the release paper on the left side of the antenna, and attach the gold finger end of the antenna along the limit groove of the lower shell (dotted line in Figure 3). The antenna groove is aligned with the limit post of the lower shell. , as shown in the circle position in Figure 3. <br><br>Then fold the antenna back to the back and stick it along the edge of the lower case, as shown in Figure 4, then tear off the release paper on the other side of the antenna and paste it on the back case, as shown in Figure 5. <br><br>After the work is completed, check whether the antenna sticker is in place, whether the sticker position is correct, and whether the sticker is wrinkled or damaged.

Antenna attachment<br>Take the wireless antenna in Figure 1, tear off the release paper on the left side of the antenna, stick the gold finger end of the antenna along the limit slot of the lower shell (dotted line in Figure 3), and align the antenna groove with the limit column of the lower shell, as shown in the circle in Figure 3.<br>Then fold the antenna back and paste it along the edge of the lower shell, as shown in Figure 4, then tear off the release paper on the other side of the antenna and paste it on the rear shell, as shown in Figure 5.<br>After the operation is completed, check whether the antenna is attached in place, whether the attachment position is correct, and whether there are wrinkles, damages and other defects in the attachment.

Antenna sticking Take the wireless antenna shown in Figure 1, tear off the release paper on the left side of the antenna, and attach the golden finger end of the antenna along the limit groove of the lower case (dotted line in Figure 3), and the antenna groove is aligned with the limit post of the lower case, as shown in Figure 3. Then fold the antenna back and attach it along the edge of the lower shell, as shown in Figure 4, then tear off the release paper on the other side of the antenna and attach it to the rear shell, and the attachment is completed as shown in Figure 5. Check whether the antenna is attached in place, whether the attachment position is correct, and whether there are wrinkles, damages and other defects in the attachment.