1、風扇標籤錯誤（無TUV及UL認證）---按客戶要求修正標籤。 2、

1. Incorrect fan label (without TUV and UL certification) --- Modify the label according to customer requirements. 2. The noise of fan start---injection and re-injection of new fan frame, the verticality is controlled at 10 or below (production immediately after injection molding)--June 18 has been completed, as shown in the above table, the fan frame is the verticality OK fan frame; use the center post jig to correct the screw. 3. There is a risk: after the customer has been using it for a period of time, the verticality of the center column becomes larger due to the temperature. (At present, the results are expected to be released on June 28)

1, fan label error (no TUV and UL certification) --- according to customer requirements to correct the label. 2, fan start noise --- injection re-injection new fan frame, verticality control in 10 or less production (injection plastic immediately shaping) --- June 18 completed, such as the above table verification fan box is vertical OK fan box; 3, there is a risk: the customer continued to use for a period of time, due to temperature, the center column vertical degree becomes larger. (Currently verified, results are expected to be released on June 28)

1. Fan label error (no TUV and UL certification) - correct the label according to the customer's requirements. 2. Fan start noise --- injection molding of new fan frame, perpendicularity control in 10 or less production (plastic immediately after injection) - completed on June 18, the fan frame is perpendicularity OK fan frame verified in the above table; when locking screws, use central column fixture to correct. 3. Risk: the perpendicularity of the central column becomes larger due to the influence of temperature after the customer continuously uses it for a period of time. (in the current verification, it is expected to show the results on June 28)<br>