规划站点的勘察就是依据网络拓扑结构设计最终输出的站点信息,通过现场查勘设计对规划站点进行落地,同时根据现场环境对各项规划参数进行范围内调整的的英语翻译

规划站点的勘察就是依据网络拓扑结构设计最终输出的站点信息,通过现场查勘

规划站点的勘察就是依据网络拓扑结构设计最终输出的站点信息,通过现场查勘设计对规划站点进行落地,同时根据现场环境对各项规划参数进行范围内调整的过程。规划站点是未经过实际勘察验证的、理论上的满足拓扑结构要求的站点。现场勘察时,需要在允许的偏差范围内,根据现场环境去选取与规划高度吻合的候选站点,之后进行勘察和设计;对于已存在的可利用站,可以直接通过现场勘察设计搜集相关的参数信息,同时进行勘察和设计。新增规划点的勘察过程中,正常每个规划站需要现场选择2-3个备选站点。在完成勘察设计后,需要对现场勘察的站点进行设计和设计会审。如果在实际勘察过程中,发现某规划站的所有备选点都不满足要求,就需要对该规划点进行重新选址和勘察;如果该规划点所在片区一直无法选取到合适的候选站点,则需要对该片区的网络拓扑结构进行范围内的调整。在完成规划站点的勘察并且通过审核之后,需要对站点进行设计方案输出。站点的设计输出主要包括两部分信息,一是输出与现场查勘所制定的方案一致的图纸,用于指导施工;二是输出相关的无线参数。在移动网络架构中,无线空口相关的指标对无线网的性能有极大影响,因此合理设计和优化相关无线指标参数也是网络规划的重要步骤之一。根据在网络中的服务对象区分,移动网络架构中的无线指标参数可以分为工程参数和资源参数两类。工程参数是指与工程息息相关的设计、安装和开通相关的指标参数,如天线的增益、馈线损耗、天线的平台挂高、方向角、下倾角、系统频点、设备发射功率等,这些参数一般在网络规划阶段中确定,在站点开通后一般不改变。资源参数指的是同无线资源配置以及应用相关的指标参数,通常情况下会以在无线接口上传送的方式来确保基站和移动台间的同步性,一般由网优和设备厂家进行设计和输出,并通过网管系统进行监测。
0/5000
源语言: -
目标语言: -
结果 (英语) 1: [复制]
复制成功!
The survey of the planning site is the process of designing the final output of the site information according to the network topology, landing the planning site through the site survey and design, and adjusting the various planning parameters according to the site environment. <br>Planning sites are sites that have not been verified by actual surveys and meet the requirements of the topology in theory. During the site survey, it is necessary to select candidate sites that are highly consistent with the planning according to the site environment within the allowable deviation range, and then conduct survey and design; for existing available stations, you can directly collect relevant parameter information through site survey and design , Simultaneous survey and design. During the survey of newly added planning points, each planning station normally needs to select 2-3 alternative stations on site. <br>After completing the survey and design, it is necessary to design and review the site surveyed on site. If in the actual survey process, it is found that all the candidate points of a planning station do not meet the requirements, it is necessary to re-site and survey the planning point; if the area where the planning point is located has not been able to select a suitable candidate site, then The network topology of the area needs to be adjusted within the scope. <br>After completing the survey of the planned site and passing the audit, the design plan of the site needs to be output. <br>The design output of the site mainly includes two parts of information, one is to output the drawings consistent with the plan made by the site survey, which is used to guide the construction; the other is to output the relevant wireless parameters. <br>In the mobile network architecture, the indicators related to the wireless air interface have a great impact on the performance of the wireless network. Therefore, the rational design and optimization of relevant wireless index parameters is also one of the important steps in network planning. According to the service objects in the network, the wireless index parameters in the mobile network architecture can be divided into two categories: engineering parameters and resource parameters. Engineering parameters refer to index parameters related to design, installation and commissioning that are closely related to the project, such as antenna gain, feeder loss, antenna platform height, direction angle, downtilt angle, system frequency point, equipment transmission power, etc. These parameters are generally It is determined during the network planning stage and generally does not change after the site is opened. The resource parameter refers to the index parameter related to the wireless resource configuration and application. Usually, it is transmitted on the wireless interface to ensure the synchronization between the base station and the mobile station. It is generally designed and output by the network optimization and equipment manufacturers. , And monitoring through the network management system.
正在翻译中..
结果 (英语) 2:[复制]
复制成功!
The survey of the planning site is the process of designing the final output of the site information according to the network topology, landing the planning site through the site survey design, and adjusting the planning parameters within the scope according to the site environment.<br>A planning site is a site that has not been verified by a physical survey and theoretically meets the topology requirements. When site survey is carried out, it is necessary to select a candidate site with a high degree of planning according to the site environment according to the permitted deviation, and then carry out the survey and design, and for the existing available stations, the relevant parameter information can be collected directly through the site survey design, and the survey and design are carried out at the same time. During the survey of the new planning points, the normal planning station requires 2-3 alternative sites to be selected on site.<br>After the completion of the survey design, the site of the site survey needs to be designed and designed. If, in the actual survey process, all the alternatives of a planning station are found to not meet the requirements, the planning point needs to be re-positioned and surveyed, and if the planning point is located in the area has not been able to select a suitable candidate site, the network topology of the area needs to be adjusted within the scope.<br>After the site is completed and approved, the site needs to be designed to be output.<br>The design output of the site mainly includes two parts of information, one is the output and the site survey of the plan of the consistent drawings, used to guide the construction, and the other is the output of the relevant wireless parameters.<br>In the mobile network architecture, wireless empty-related indicators have a great impact on the performance of wireless networks, so the rational design and optimization of the relevant wireless indicator parameters is also one of the important steps in network planning. According to the service object in the network, the wireless indicator parameters in the mobile network architecture can be divided into engineering parameters and resource parameters. Engineering parameters refer to the design, installation and opening related to the project related to the indicator parameters, such as antenna gain, feeder loss, antenna platform hanging height, direction angle, lower inclination, system frequency point, equipment transmission power, these parameters are generally determined in the network planning stage, after the site opened generally does not change. Resource parameters refer to the wireless resource allocation and application-related indicator parameters, usually in the wireless interface transmission way to ensure the synchronization between the base station and mobile station, generally by the network excellent and equipment manufacturers design and output, and through the network management system monitoring.
正在翻译中..
结果 (英语) 3:[复制]
复制成功!
The survey of the planning site is the process of landing the planning site according to the final output of the network topology design, and adjusting the planning parameters according to the site environment.<br>The planned site is a site that has not been verified by actual investigation and meets the topological structure requirements in theory. During the field survey, the candidate sites that are highly consistent with the planning shall be selected according to the site environment within the allowable deviation range, and then the survey and design shall be carried out; for the existing available stations, the relevant parameter information can be collected directly through the field survey and design, and the survey and design shall be carried out at the same time. During the survey of new planning points, normally each planning station needs to select 2-3 alternative stations on site.<br>After the completion of survey and design, it is necessary to conduct design and design joint review on the site survey site. If in the actual survey process, it is found that all the alternative points of a planning station do not meet the requirements, the planning point needs to be relocated and surveyed; if the area where the planning point is located has not been able to select the appropriate candidate sites, the network topology of the area needs to be adjusted within the scope.<br>After completing the survey of the planned site and passing the review, it is necessary to output the design scheme of the site.<br>The design output of the station mainly includes two parts of information, one is to output the drawings consistent with the scheme made by the site survey, which are used to guide the construction; the other is to output the relevant wireless parameters.<br>In the mobile network architecture, the performance of wireless network is greatly affected by the related indicators of wireless air port, so the reasonable design and optimization of the related wireless indicators is also one of the important steps of network planning. According to the difference of service objects in the network, the wireless index parameters in the mobile network architecture can be divided into engineering parameters and resource parameters. Engineering parameters refer to the design, installation and opening related index parameters closely related to the project, such as antenna gain, feeder loss, antenna platform hanging height, direction angle, dip angle, system frequency point, equipment transmission power, etc., which are generally determined in the network planning stage and generally remain unchanged after the station is opened. Resource parameter refers to the index parameter related to wireless resource configuration and application. Usually, the synchronization between base station and mobile station will be ensured by transmitting on wireless interface. Generally, it is designed and output by network optimization and equipment manufacturer, and monitored by network management system.<br>
正在翻译中..
 
其它语言
本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.

Copyright ©2024 I Love Translation. All reserved.

E-mail: