使用方法：1，使用前，先从包装内取出。2，按压电源键，蜂鸣器会发出蜂鸣

Usage: <br>1, before use, remove the packaging start. <br>2, the power button is pressed, the buzzer will beep, display prompt. <br>3, then, the display displays the last measured temperature, and wonderful for 2 minutes, followed by a display ° C Symbol flash to indicate the test state. <br>4, the thermometer sensor head into the water, the display shows the temperature gradually rises. Meanwhile ° C Symbol flashes to indicate the measurement. The measurement temperature constant for 16 wonderful, ° C Symbol then stops blinking and the temperature measurement is completed the memorized measurement results can be read displayed temperature value. <br>5, after the measurement, such as pressing the power button without the power off, the automatic shutdown after 8 minutes.

How to use:<br>1, before use, first remove from the package.<br>2. Press the power key and the buzzer will beep, displaying a prompt symbol.<br>3, the display then shows the last measured temperature, and continues 2 wonderful clock, and then the display 'C symbol flashes to indicate that it's in a state to be tested.<br>4. Put the thermometer sensing head into the water and the display shows that the temperature is gradually rising. At the same time, the symbol flashes to indicate that the measurement is in progress. In the measurement, if the temperature of 16 consecutive degrees does not change, the symbol of the water temperature is completed and the measurement results have been remembered, the displayed temperature value can be read.<br>5, after the measurement is complete, if you do not press the power key to turn off the power, then after 8 minutes automatically shut down.

usage method:<br>1. Take it out of the package before use.<br>2. Press the power key, the buzzer will emit a beep and display the prompt symbol.<br>3. Then, the display shows the temperature measured last time and lasts for 2 minutes. Then, the display symbol of ° C flashes to indicate that it is in the state to be measured.<br>4. Put the sensor head of the thermometer into the water, and the display shows that the temperature rises gradually. Meanwhile, the symbol of ° C flashes, indicating that the measurement is in progress. In the measurement, if the temperature remains unchanged for 16 consecutive minutes, the symbol of ° C will stop flashing, indicating that the water temperature has been measured and the measurement result has been memorized, and then the displayed temperature value can be read.<br>5. After the measurement, if the power key is not pressed to turn off the power supply, it will turn off automatically after 8 minutes.