加速器自动操作控制。操作加速器必须按先后次序操作,若发生误操作,联锁保

加速器自动操作控制。操作加速器必须按先后次序操作,若发生误操作,联锁保护系统就立即起作用。加速器总控制是把各分系统的联锁保护合理安排，使它们满足加速器运行操作规范的规定。在加速器开机时，当前一个操作步骤尚未达到预定要求之前，下一步操作将不起作用。例如:需要通水冷却的设备,未通水之前设备就不能启动，即使己在运转的设备，冷却水-断，除了该设备停止运转以外，在它以后的各设备的操作亦均失效。这些控制规程均纳入计算机控制程序,自动处理加速器从准备到正常运行的全部操作

加速器自动操作控制。 操作加速器必须按先后次序操作,若发生误操作,联锁保护系统就立即起作用。 加速器总控制是把各分系统的联锁保护合理安排，使它们满足加速器运行操作规范的规定。 在加速器开机时，当前一个操作步骤尚未达到预定要求之前，下一步操作将不起作用。 例如:需要通水冷却的设备,未通水之前设备就不能启动，即使己在运转的设备，冷却水-断，除了该设备停止运转以外，在它以后的各设备的操作亦均失效。 这些控制规程均纳入计算机控制程序,自动处理加速器从准备到正常运行的全部操作

Accelerator automatic operation control. The accelerator must be operated in sequence. In case of misoperation, the interlock protection system will work immediately. The main control of the accelerator is to arrange the interlock protection of each subsystem reasonably so that they can meet the requirements of the operation specifications of the accelerator. When the accelerator is powered on, the next operation will not work until the current operation step has reached the predetermined requirements. For example: for equipment requiring water cooling, the equipment cannot be started before water is connected. Even if the equipment is in operation, cooling water - off, except for the equipment stopping operation, the operation of all equipment after it is also invalid. These control procedures are included in the computer control program, which automatically processes all operations of the accelerator from preparation to normal operation<br>