节能说明: 1.现状为靠人工调节出水阀阀芯开启程度来控制输出水压的大小。很大部分能耗浪费在了阀芯的内阻上面,改造后,阀芯将100%完全开启,的英语翻译

节能说明: 1.现状为靠人工调节出水阀阀芯开启程度来控制输出水压的大小

节能说明: 1.现状为靠人工调节出水阀阀芯开启程度来控制输出水压的大小。很大部分能耗浪费在了阀芯的内阻上面,改造后,阀芯将100%完全开启,会大大减小浪费在阀芯上内阻,从而节省能耗! 2.现在水泵电机是Y/D启动,一直是50 Hz的工频状态下运转,额定转速为1480 r/min,改造后采用变频器控制变频恒压供水系统,是通过压力传感器输出的PID给定值,来控制整个系统的运行,电机运行转速会大,大低于额定转速,从而节省能耗。由数据可知,从理论计算可以看到明显的节能效果,特别是从单台水泵的节能来看,流量越小,节能量越大.采用阀门控制45KW电机实际生产中电流在80A左右,实际功率大约P=√3*380*80*0.82=43KW.即水泵的功耗为43KW/H(度)。水泵阀门开度为36.5%接近40%采用变频控制变频恒压供水系统是通过压力传感器输出的PID给定值,来控制整个系统的运行,水泵的运转随系统压力的变化而自动调节,根据计算公式,考虑机械损耗,视生产情况定节电率在20%~30%之间。假设每天工作24小时,全年工作350天全年节约电费为:按20%计算:43度*24H*350D*20%*0.57元/度=41176元 按30%计算: 43度*24H*350D*30%*0.57元/度=61765元。一年节约电费就高达41176元-61765元之间。
0/5000
源语言: -
目标语言: -
结果 (英语) 1: [复制]
复制成功!
Energy saving instructions: 1. The current situation is to control the output water pressure by manually adjusting the opening degree of the outlet valve spool. A large part of the energy consumption is wasted on the internal resistance of the spool. After the transformation, the spool will be 100% fully opened, which will greatly reduce the internal resistance wasted on the spool and save energy! 2. Now the water pump motor is started by Y/D, and it has been running under 50 Hz power frequency, and the rated speed is 1480 r/min. After the transformation, the inverter is used to control the variable frequency constant pressure water supply system, which is the PID output from the pressure sensor. Set value to control the operation of the entire system, the motor running speed will be large, much lower than the rated speed, thereby saving energy. <br>From the data, we can see the obvious energy-saving effect from theoretical calculations, especially from the energy-saving of a single pump, the smaller the flow, the greater the energy-saving. In the actual production of the valve control 45KW motor, the current is about 80A, the actual power Approximately P=√3*380*80*0.82=43KW. That is, the power consumption of the pump is 43KW/H (degree). The opening of the pump valve is 36.5% close to 40%. The frequency conversion constant pressure water supply system is controlled by the PID set value output by the pressure sensor to control the operation of the entire system. The operation of the pump is automatically adjusted according to the change of the system pressure. Formula, considering the mechanical loss, the power saving rate is between 20% and 30% depending on the production situation. Suppose work 24 hours a day, 350 days annual work annual electricity savings is: <br>calculated 20%: 43 degrees * 24H * 350D * 20% * 0.57 yuan / kWh = 41176 yuan <br>calculated at 30%: 43 degrees * 24H * 350D *30%*0.57 yuan/degree=61765 yuan. <br>The savings in electricity bills in one year is as high as between 41176 yuan and 61765 yuan.
正在翻译中..
结果 (英语) 2:[复制]
复制成功!
Energy saving description: 1. The status quo is to control the size of the output water pressure by manually adjusting the opening degree of the valve core. A large part of the energy consumption wasted on the valve core on top of the internal resistance, after the transformation, the valve core will be 100% fully open, will greatly reduce waste on the valve core internal resistance, thereby saving energy consumption! 2. Now the pump motor is Y/D start-up, has been 50 Hz operating in the operating frequency state, rated speed of 1480 r/min, after the transformation of the use of inverter control variable frequency constant voltage water supply system, is through the pressure sensor output OF given value, to control the operation of the entire system, the motor running speed will be large, large below the rated speed, thereby saving energy consumption.<br>From the data can be seen, from the theoretical calculation can see the obvious energy saving effect, especially from the energy saving of a single pump, the smaller the flow, the greater the amount of energy saving. The actual production of a valve-controlled 45KW motor has a current of about 80A, and the actual power is approximately P-√380-80-0.82-43KW. That is, the power consumption of the pump is 43KW/H (degrees). Pump valve opening rate of 36.5% close to 40% using variable frequency control variable frequency constant pressure water supply system is a pressure sensor output OFD given value to control the operation of the entire system, pump operation with the change of system pressure and automatic adjustment, according to the calculation formula, consider mechanical losses, depending on production conditions fixed power saving rate between 20% to 30%. Suppose you work 24 hours a day, 350 days a year to save on electricity costs:<br>Calculated at 20%: 43 degrees x 24H x 350D x 20% x 0.57 yuan / degree x 41176 yuan <br>Calculated at 30%: 43 degrees x 24H x 350D x 30% x 0.57 yuan / degree x 61765 yuan.<br>One year to save electricity costs as high as 41,176 yuan - 61765 yuan.
正在翻译中..
结果 (英语) 3:[复制]
复制成功!
Energy saving instructions: 1. The current situation is to control the output water pressure by manually adjusting the opening degree of the outlet valve spool. Most of the energy consumption is wasted on the internal resistance of the valve core. After the transformation, the valve core will be fully opened, which will greatly reduce the internal resistance wasted on the valve core, so as to save energy! 2. Now the water pump motor is started by Y / D and has been running at 50 Hz power frequency. The rated speed is 1480 R / min. after the transformation, the inverter is used to control the variable frequency constant pressure water supply system. The PID value output by the pressure sensor is used to control the operation of the whole system. The running speed of the motor will be large, much lower than the rated speed, so as to save energy.<br>From the data, we can see the obvious energy-saving effect from the theoretical calculation, especially from the energy-saving of a single pump, the smaller the flow, the greater the energy-saving amount. In the actual production, the current of 45KW motor controlled by valve is about 80A, and the actual power is about P = √ 3 * 380 * 80 * 0.82 = 43kw. That is, the power consumption of water pump is 43kw / h (degree). The valve opening of water pump is 36.5% and close to 40%. The frequency conversion constant pressure water supply system controls the operation of the whole system through the PID value output by the pressure sensor. The operation of the water pump is automatically adjusted with the change of the system pressure. According to the calculation formula, considering the mechanical loss, the power saving rate is between 20% and 30% depending on the production situation. Assuming 24 hours a day and 350 days in a year, the annual electricity saving is as follows:<br>Calculated by 20%: 43 Degree * 24h * 350d * 20% * 0.57 yuan / degree = 41176 yuan<br>Calculated by 30%: 43 Degree * 24h * 350d * 30% * 0.57 yuan / degree = 61765 yuan.<br>A year's electricity saving is as high as 41176-61765 yuan.<br>
正在翻译中..
 
其它语言
本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.

Copyright ©2024 I Love Translation. All reserved.

E-mail: