四、进入调整状态。1、输入端送入4mADC电流、确认阀门位置为初始稳定

4. Enter the adjustment state. <br>1. Input 4mADC current into the input terminal, confirm that the valve position is the initial stable value of 0%, press the 4mA button, the LED will flash 3-5 times, and the feedback initial value of 3.95mA will be restored. After the light flashes, click the 4mA light again to flash 3-5, and then the feedback 0% adjustment is completed. 2. Input 8.0mADC current into the input terminal, confirm that the valve position is 25% when initially stable, press the 8mA key, the LED will flash 3-5 times, and the feedback shows 8.0mA, which is about 25%. After the light flashes, press the 8.0mA light again to flash 3-5, and then feedback that 25% adjustment is complete. 3. Input 12.0mADC current into the input terminal, confirm that the valve position is 50% when initially stable, press the 12.0mA button, the LED will flash 3-5 times, and the feedback shows 12.0mA, which is about 50%. After the light flashes, press the 12.0mA light again to flash 3-5, and then the feedback is 50% adjustment completed. 4. Input 16mADC current into the input terminal, confirm that the valve position is 75% when initially stable, press the 16.0mA key, the LED will flash 3-5 times, and the feedback shows 16.0mA, which is about 75%. After the light flashes, click the 16.0mA light again to flash 3-5, and then the feedback is 75% adjusted. 5. Input 20mADC current into the input terminal, confirm that the valve position is 100% when initially stable, press the 20.0mA key, the LED will flash 3-5 times, and the feedback shows 20.0mA, which is about 100%. After the light flashes, press the 20.0mA light again to flash 3-5, and the feedback is 100% complete. Enter the central control automatic control mode. 6. For example, 4mA, 8mA, 12mA, 16mA, 20mA in the return stroke, if there is a deviation when the valve position of each point is stable, it can be adjusted according to the corresponding point.

Fourth, enter the adjustment state.<br>1, the input input into 4mADC current, confirm the valve position for the initial stable value of 0%, press 4mA key, LED flash 3-5 times, restore feedback initial value of 3.95mA. When the lamp flashes, click the 4mA lamp flash 3-5 again, the feedback 0% adjustment is complete. 2, the input input input 8.0mADC current, confirm the valve position for the initial stability of 25%, press 8mA key, LED flash 3-5 times, feedback shows 8.0mA is about 25%. When the lamp flashes, click 8.0mA light flash 3-5 after the feedback 25% adjustment is complete. 3, the input input into 12.0mADC current, confirm the valve position for the initial stability of 50%, press 12.0mA key, LED strobe 3-5 times, feedback shows 12.0mA is about 50%. When the lamp flashes, click 12.0mA light flash 3-5 completed, the feedback 50% adjustment is complete. 4, the input input into 16mADC current, confirm the valve position for the initial stability of 75%, press 16.0mA key, LED flash 3-5 times, feedback shows 16.0mA is about 75%. When the lamp flashes, click 16.0mA light flash 3-5 completed, the feedback 75% adjustment is complete. 5, the input input into 20mADC current, confirm the valve position for the initial stability of 100%, press 20.0mA key, LED strobe 3-5 times, feedback shows 20.0mA that is about 100%. When the lamp flashes, click 20.0mA light flash 3-5 after the completion of the feedback 100% adjustment. Enter the central automatic control mode. 6, such as in the return journey 4mA, 8mA, 12mA, 16mA, 20mA, each point valve position stability, if there is a deviation can be adjusted according to the corresponding point.

4、 Enter the adjustment state.<br>1. Input 4madc current into the input terminal, confirm that the valve position is the initial stable value of 0%, press 4mA key, the LED flashes 3-5 times, and the initial feedback value is 3.95ma. After the lamp flashes, press 4mA again, and the light flashes 3-5. Then the feedback is 0% adjusted. 2. Input 8.0madc current, confirm valve position is 25% when initial stable, press 8Ma key, led flicker 3-5 times, feedback display 8.0ma, that is about 25%. After the light flashes, press 8.0ma again, and the lamp flashes 3-5, then the feedback 25% adjustment is completed. 3. Input 12.0madc current at input terminal, confirm that valve position is 50% when initial stable, press 12.0ma key, led flicker 3-5 times, feedback display 12.0ma, that is about 50%. When the light flashes, press 12.0ma again, and the light flashes 3-5, then the feedback 50% adjustment is completed. 4. Input the current of 16madc at the input end, confirm that the valve position is 75% at the initial stable state, press the 16.0ma key, the LED flickers for 3-5 times, and the feedback shows that 16.0ma is about 75%. After the lamp flashes, press 16.0ma again to complete the lamp flashing 3-5, and then feedback 75% adjustment is completed. 5. Input 20mADC current into the input terminal, confirm that the valve position is 100% when the initial stable, press the 20.0ma key, the LED flashes 3-5 times, and the feedback shows that 20.0ma is about 100%. After the lamp flashes, press 20.0ma again, and the lamp flashes 3-5, then feedback 100% adjustment is completed. Enter the central control automatic control mode. 6. For example, when the return stroke is 4mA, 8Ma, 12mA, 16mA, 20mA, when the valve position at each point is stable, if there is deviation, it can be adjusted according to the corresponding point.