金赛尔回复改善对策：1.此款电芯技术优化二封SOP，调整二封装未封区域

Measures to improve Kinsale Reply: <br>1. This cell technology to optimize the SOP two, two adjustment package unsealed area width B = 0.4 ± 0.2mm B = 0.5-1.5mm Production Optimization strictly enforced standards, quality Governor section. check. <br>2. Drag detecting two rotary machine process cartridge configured specifically red material, the unified transfer machine product placed two test verifies conditioner products; IPQC perform supervision. <br>3. Drag detecting ocular inspection staff specially arranged for the subject to perform a full TQC two audit inspection region size, the first member conditioners verify the product, then the size of the US text-defective mark on the tape transfer step, defective product directly scissors scrap . <br>Note: Kinsale use of automated production, can not completely eliminate such problems, but you can control the defect rate in parts per million, the Division I after re-screening can block out again part of defective products.

Kinsel responds to improvement:<br>1. This core technology optimizes the second SOP, adjusts the width of the unsealed area of the second package B -0.4 to 0.2mm optimization B-0.5-1.5mm. The production department strictly enforces the standard, and the quality department supervises.<br>2. Test ingress two-seal machine operation configuration special red material box, unified transfer products placed two-seal transfer machine test verification products;<br>3. Testshop inspector configuration eyepiece specifically for the two regional size inspection audit, the first transfer machine verification product TQC to carry out the full inspection, size of qualified products and then Meiwen plastic paper marked flow under the process, the bad products direct scissors cut open scrap treatment.<br>Note: Kinsel uses automation for production, can not completely eliminate such problems, but can control the bad rate in one in 10,000, I division after screening can again intercept a part of the bad products.

Countermeasures for improvement of kinsel's reply:<br>1. optimize the two seal SOP of this type of core technology, adjust the width of unsealed area of two packages B=0.4 ± 0.2mm, optimize B=0.5-1.5mm. the production department strictly implements the standard, and the quality department supervises.<br>2. Special red material box shall be equipped for the second sealing machine process of the rotary table in the inspection workshop, and the transferred products shall be placed in the second sealing machine test verification products uniformly; IPQC shall perform supervision.<br>3. Inspectors in the inspection workshop shall be equipped with eyeglasses to check the dimensions of the secondary sealing area. TQC of the first piece of machine adjustment verification product shall carry out full inspection. The qualified products shall be marked on the American paper for the next process, and the defective products shall be directly cut by scissors and scrapped.<br>Note: kinsel uses automation for production, which can not completely eliminate such problems, but can control the defect rate of 1 / 10000. After screening, our company can intercept a part of the defective products again.