1、充填机内外不得有清洁死角及积水现象；2、机台底部分电柜出线必须从底

1. There must be no clean dead corners and water accumulation inside and outside the filling machine; <br>2. The outlet of the electric cabinet at the bottom of the machine must be from the bottom to prevent water from entering, and the waterproof level is above IP55; <br>3. The bottom of the filling machine must be 30cm above the ground <br>4. No There are clean dead corners. <br>5. The water in the scope of supply does not fall to the ground. <br>6. The gap between the filling head and the barrel groove must be tightly sealed, and there must be no milk residue. <br>7. There must be no rust in the positive pressure cover. If there is rust, each point will be deducted 1,000 yuan Warranty

1, the filling machine inside and outside must not have a clean dead end and water phenomenon;<br>2, the bottom part of the electric cabinet line must be out from the bottom, to prevent water entry, waterproof grade IP55 or more;<br>3, the bottom of the filler needs to be more than 30cm off the ground<br>4, can not have a clean dead end<br>5, within the scope of supply of water does not land<br>6, filling head and barrel groove gap must be sealed tightly, there must be no milk residue<br>7, positive pressure cover must not have rust, such as rust every point press 1000 yuan deduction warranty

1. There shall be no clean dead angle and water accumulation inside and outside the filling machine;<br>2. The outlet of the electric cabinet at the bottom of the machine must come out from the bottom to prevent water from entering. The waterproof grade is above IP55;<br>3. The bottom of the filling machine should be more than 30cm above the ground<br>4. There should be no clean dead ends<br>5. No water falling within the scope of supply<br>6. The gap between the filling head and the tank must be sealed tightly without milk residue<br>7. There shall be no rust in the positive pressure cover. If there is any rust, the warranty deposit shall be deducted by 1000 yuan per point<br>