由于BaTiO3具有优异的介电和铁电特性，受到广泛的关注。本文以低温冷

由于BaTiO3具有优异的介电和铁电特性，受到广泛的关注。本文以低温冷烧结工艺制备出高致密、介电性能优异的BaTiO3陶瓷。探究了熔剂类别、冷烧结工艺(烧结温度、烧结时间、单轴压力)、退火方式(传统退火、微波退火)对陶瓷结构、微观形貌及性能的影响。研究了粉末处理工艺(乙酸浓度、处理时间、处理温度)对陶瓷样品的冷烧结致密化影响。按照MLCC制备工艺，采用冷烧结工艺制备多层BaTiO3陶瓷。通过对样品的密度、物相、微观结构和介电性能进行表征和分析得出以下结论：

0/5000

源语言: -

目标语言: -

结果 (简体中文) 1: [复制]

复制成功！

正在翻译中..

结果 (简体中文) 2:[复制]

复制成功！

BaTiO3 has attracted extensive attention because of its excellent dielectric and ferroelectric properties. In this paper, BaTiO3 ceramics with high density and excellent dielectric properties were prepared by low temperature cold sintering process. The effects of flux type, cold sintering process (sintering temperature, sintering time, uniaxial pressure) and annealing method (traditional annealing and microwave annealing) on the structure, microstructure and properties of ceramics were investigated. The effects of powder treatment process (acetic acid concentration, treatment time and treatment temperature) on the cold Sintering Densification of ceramic samples were studied. Multilayer BaTiO3 ceramics were prepared by cold sintering process according to MLCC preparation process. By characterizing and analyzing the density, phase, microstructure and dielectric properties of the samples, the following conclusions are drawn:

正在翻译中..

结果 (简体中文) 3:[复制]

复制成功！

BaTiO3 has attracted wide attention because of its excellent dielectric and ferroelectric properties. In this paper, BaTiO3 ceramics with high density and excellent dielectric properties were prepared by low-temperature cold sintering process. The effects of flux types, cold sintering process (sintering temperature, sintering time, uniaxial pressure) and annealing methods (traditional annealing and microwave annealing) on the structure, microstructure and properties of ceramics were investigated. The effect of powder treatment process (acetic acid concentration, treatment time, treatment temperature) on the densification of ceramic samples by cold sintering was studied. According to MLCC preparation process, multilayer BaTiO3 ceramics were prepared by cold sintering process. The density, phase, microstructure and dielectric properties of the samples were characterized and analyzed, and the following conclusions were obtained:

正在翻译中..

其它语言

本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.