交叉滚子轴承交叉滚子轴承，是圆柱滚子或圆锥滚子在呈90度的V形沟槽滚动

Crossed roller bearings <br>Crossed roller bearings are cylindrical rollers or tapered rollers that are arranged perpendicular to each other through spacers on a 90-degree V-groove rolling surface, so crossed roller bearings can bear radial loads, shaft Multi-directional load such as load and moment load. The size of the inner and outer ring is miniaturized, the ultra-thin form is closer to the limit of the small size, and has high rigidity, and the accuracy can reach P5, P4, P2 level. Therefore, it is suitable for joint parts and rotary parts of industrial robots, rotary tables of machining centers, precision rotary tables, medical machines, calculators, military industry, IC manufacturing equipment and other equipment. <br><br>The characteristics of crossed roller bearings: <br><br>1. The <br><br>internal structure of the crossed roller bearings has excellent rotation accuracy. The rollers are arranged at 90 ° to cross each other perpendicularly. There are spacers or spacers between the rollers to prevent the roller from tilting The cargo rollers rub against each other, effectively preventing the increase of the rotating torque. In addition, there will be no contact or locking phenomenon of the roller; at the same time, because the inner and outer rings are divided structures, the gap can be adjusted, and even if preload is applied, high-precision rotational movement can be obtained. <br><br>2. Simplified operation and installation <br><br>The outer ring or inner ring, which is divided into two parts, is fixed together after the roller and the cage are installed, so the operation is very simple during installation. <br><br>3. Withstand large axial and radial loads. <br><br>Because the rollers are vertically arranged on the rolling surface of the 90 ° V-groove through the spacer, this design allows the crossed roller bearings to withstand larger Radial load, axial load and moment load and other directions. <br><br>4. Significantly save installation space. The <br><br>size of the inner and outer rings of the cross roller bearing is minimized, especially the ultra-thin structure is a small size close to the limit, and has high rigidity. , Rotating table of machining center, rotating part of manipulator, precision rotating table, medical instruments, measuring instruments, IC manufacturing equipment, etc. are widely used.

交叉滚子轴承<br>交叉滚子轴承，是圆柱滚子或圆锥滚子在呈90度的V形沟槽滚动面上通过隔离块被相互垂直地排列，所以交叉滚子轴承可承受径向负荷、轴向负荷及力矩负荷等多方向的负荷。内外圈的尺寸被小型化，极薄形式更是接近于极限的小型尺寸，并且具有高钢性，且精度可达到P5、P4、P2级。因此适合于工业机器人的关节部和旋转部、机械加工中心的旋转台，精密旋转工作台、医疗机器、计算器、军工、IC制造装置等设备。<br><br>交叉滚子轴承的特点：<br><br>1、具有出色的旋转精度<br><br>交叉滚子轴承内部结构采用滚子呈90°相互垂直交叉排列，滚子之间装有间隔保持器或者隔离块，可以防止滚子的倾斜货滚子之间相互磨察，有效防止了旋转扭矩的增加。另外，不会发生滚子的一方接触现象或者锁死现象；同时因为内外环是分割的结构，间隙可以调整，即使被施加预压，也能获得高精度的旋转运动。<br><br>2、操作安装简化<br><br>被分割成两部分的外环或者内环，在装入滚子和保持器后，被固定在一起，所以安装时操作非常简单。<br><br>3、承受较大的轴向和径向负荷<br><br>因为滚子在呈90°的V型沟槽滚动面上通过间隔保持器被相互垂直排列，这种设计使交叉滚子轴承就可以承受较大的径向负荷、轴向负荷及力矩负荷等所有方向的负荷。<br><br>4、大幅节省安装空间<br><br>交叉滚子轴承的内外环尺寸被最小限度的小型化，特别是超薄结构是接近极限的小型尺寸，并且具有高刚性，所以最适合于工业机器人的关节部位或者旋转部位、机械加工中心的旋转工作台、机械手旋转部、精密旋转工作台、医疗仪器、计量器具、IC制造装置等广泛用途。

Cross roller bearing<br>Cross roller bearing is a kind of vertical arrangement of cylindrical roller or tapered roller on the rolling surface of V-shaped groove with 90 degrees through isolation block, so it can bear radial load, axial load and moment load. The size of the inner and outer rings is miniaturized, the extremely thin form is close to the limit of the small size, and has high steel, and the accuracy can reach P5, P4, P2. Therefore, it is suitable for the joint and rotating parts of industrial robots, rotating tables of machining centers, precision rotating worktables, medical machines, calculators, military industry, IC manufacturing devices and other equipment.<br>Characteristics of cross roller bearing:<br>1. Excellent rotation accuracy<br>The internal structure of the cross roller bearing adopts the roller to be arranged in 90 ° mutually vertical cross arrangement, and the roller is equipped with a spacing keeper or an isolating block between them, which can prevent the inclined cargo roller of the roller from grinding each other and effectively prevent the increase of rotation torque. In addition, one side contact or locking phenomenon of roller will not occur; at the same time, because the inner and outer rings are divided structure, the gap can be adjusted, and even when preloading is applied, high-precision rotary motion can be obtained.<br>2. Simplified operation and installation<br>The outer ring or inner ring, which is divided into two parts, is fixed together after the roller and retainer are installed, so the installation is very simple.<br>3. Bearing large axial and radial loads<br>Because the rollers are arranged perpendicular to each other on the V-groove rolling surface of 90 °, the cross roller bearing can bear large radial load, axial load, moment load and other loads in all directions.<br>4. Save installation space<br>The inner and outer ring size of cross roller bearing is miniaturized to the minimum, especially the ultra-thin structure is close to the limit of small size, and has high rigidity, so it is most suitable for the joint or rotating part of industrial robot, the rotating table of machining center, the rotating part of manipulator, the precision rotating table, medical instruments, measuring instruments, IC manufacturing devices, etc General purpose.<br>