电子控制自动变速器如果出现换挡冲击故障，应检查油压电磁阀的线路以及油压

If the electronically controlled automatic transmission has a shift shock failure, check the circuit of the oil pressure solenoid valve and whether the oil pressure solenoid valve is working properly, whether the computer is sending a control signal to the oil pressure solenoid valve for a short period of time. If the circuit fails, it should be checked Repair; if the solenoid valve is damaged, replace the solenoid valve; if the computer does not send a control signal to the hydraulic solenoid valve when shifting gears, it means the computer is malfunctioning. therefore

Electronic control automatic transmission if there is a shift impact failure, should check the oil pressure solenoid valve line and oil pressure solenoid valve is working properly, whether the computer is in the short shift to the oil pressure solenoid valve to send a control signal if the circuit failure, should be repaired; If the solenoid valve is damaged, the solenoid valve should be replaced; If the computer does not send a control signal to the hydraulic solenoid valve when shifting gears, the computer is faulty. So.

电子控制自动变速器如果出现换挡冲击故障，应检查油压电磁阀的线路以及油压电磁阀工作是否正常、电脑是否在换挡的短暂向油压电磁阀发出控制信号如果电路出现故障，应进行修理;若电磁阀损坏，应更换电磁阀;如果计算机在换挡时没有向液压电磁阀发送控制信号，则说明计算机故障。因此<br>