功率在60Ｗ以上的照明灯具不准在临时宿舍内照明使用，所有的线路必须穿管

Allowed power illumination used in temporary quarters 60W lighting in the above, all the lines must wear protective tube. <br>Wiring and unauthorized use of an electric furnace, electric appliances are prohibited at the construction site and temporary quarters. <br>Periodic inspection must be all lines for electrical equipment and, where necessary repairs if there may cause a spark, short circuit, heat insulation damage and the like immediately. <br>(5) Hot work before and after inspectors to be informed of the fire or on duty. <br>(6) the use of high temperature lamps, such as halogen lamp away from flammable materials, a minimum of not less than 100cm, away from explosive materials should be more than 3m.

Lighting fixtures with more than 60W power are not allowed to be used in temporary dormitories, and all lines must be protected by tubes.<br> Private wiring and the use of electric stoves, electric heating appliances are strictly prohibited at the construction site and temporary dormitory.<br> Regular inspections must be carried out on all electrical equipment and wiring, and repairs must be carried out immediately if it is found to cause sparks, short circuits, heat and insulation damage.<br>(5) Before and after the fire operation to inform the fire inspector or duty personnel.<br>6 when using high temperature lamps, such as tungsten iodine lamps should be away from flammable items, the minimum is not less than 100cm, from explosive items should be more than 3m.

The lighting lamps with power more than 60W are not allowed to be used in the temporary dormitory. All lines must be protected by pipes.<br>It is forbidden to connect and use electric furnaces and electric appliances without permission at the construction site and temporary dormitories.<br>Regular inspection must be carried out for all electrical equipment and circuits, and repair must be carried out immediately if it is found that it may cause spark, short circuit, heating, insulation damage, etc.<br>(5) Before and after hot work, the fire inspector or on duty personnel shall be informed.<br>(6) When using high-temperature lamps, such as iodine tungsten lamp, it should be away from inflammable materials, at least not less than 100cm, and more than 3m away from explosive materials.