不同基础油铣削力峰值平均值由图10可以看出，与传统的切削液浇注式铣削的

The average value of the milling force peak value of different base oils can be seen from Figure 10. Compared with the milling force of traditional cutting fluid casting milling, the milling force is reduced, of which cotton seed oil is reduced by 34.6%, palm oil is reduced by 24.5%. Hemp oil decreased by 31%, soybean oil decreased by 25.8%, peanut oil decreased by 29.8%, and the milling force of cottonseed oil decreased the most. The ranking of the average value of the milling force of five different base oils is:

The peak average of different base oil milling force can be seen from Figure 10, compared with the traditional cutting fluid pouring milling force, there is a decrease, in which cottonseed oil decreased by 34.6%, palm oil by 24.5%, castor oil by 31%, soybean oil by 25.8%, peanut oil by 29.8%, cotton seed milling force reduction of the maximum, five different base oil cutting force sipped average:

As can be seen from Fig. 10, the milling force of cottonseed oil is reduced by 34.6%, palm oil by 24.5%, castor oil by 31%, soybean oil by 25.8%, peanut oil by 29.8%, and milling force of cottonseed oil by the largest extent. The milling force peaks of five different base oils are reduced The order of average values is as follows:<br>