综上，所测A、B区域零件上未发现起皱、压伤、开裂、叠料等可见缺陷；根据

In summary, the measured A, No wrinkling, crushing, cracking, and other visible defects on the laminated material part region B; the strain measurement results, no significant thinning phenomenon and the like orange peel; all points in each area position is in safe area FLD diagram. It can be seen, this part forming process is reasonable, part quality is acceptable.

In summary, no visible defects such as wrinkle, crimping, cracking, stacking were found on the measured A and B area parts, and no obvious thinning and orange peel strains occurred according to the strain measurement results, and all points in each region were in the safe area of the FLD map. It can be seen that the forming process of this part is reasonable and the quality of the part is qualified.

To sum up, no visible defects such as wrinkling, crushing, cracking and stacking are found on the measured parts in areas a and B; according to the strain measurement results, no obvious thinning and orange peel are found; all points in each area are in the safety area of FLD. Therefore, the forming process of this part is reasonable and the quality of the part is qualified.<br>