本文主要介绍的是斜轴式轴向柱塞泵专用配流盘的建模、工艺分析和加工制造的

本文主要介绍的是斜轴式轴向柱塞泵专用配流盘的建模、工艺分析和加工制造的过程，在进行配流盘工艺分析时，通过配流盘结构分析工件加工工艺，工件的加工工艺有多种，本文采用了效率最为高的一种，本文设计的核心内容是配流盘的三维建模、结构分析、装夹方案、加工制造，通过经济效益和质量效益的综合，加工出此配流盘。<br>在探究工件装夹方案时，发现想要加工出工件，一般的夹具无法胜任，只有设计并加工出专用夹具，才能进行定位加工，在进行思路的延伸时，对于此配流盘，一次装夹不可能加工成功，而且在二次装夹时，发现z向只通过气压不能达到压紧效果，需要对毛坯进一步处理，加工该工件就需要三次装夹。<br>通过加工时遇到的一个个问题，对加工工艺设置的参数进行了一步步的完善，加工的最后阶段切断时还发现，要对毛坯放置一个压板限制住工件离开毛坯后的z向移动，在加工完成后对工件进行尺寸检测，发现检测结果符合尺寸要求。<br><br>关键词：结构分析；加工工艺；装夹方案；专用夹具；检测

本文主要介绍的是斜轴式轴向柱塞泵专用配流盘的建模、工艺分析和加工制造的过程，在进行配流盘工艺分析时，通过配流盘结构分析工件加工工艺，工件的加工工艺有多种，本文采用了效率最为高的一种，本文设计的核心内容是配流盘的三维建模、结构分析、装夹方案、加工制造，通过经济效益和质量效益的综合，加工出此配流盘。<br>在探究工件装夹方案时，发现想要加工出工件，一般的夹具无法胜任，只有设计并加工出专用夹具，才能进行定位加工，在进行思路的延伸时，对于此配流盘，一次装夹不可能加工成功，而且在二次装夹时，发现z向只通过气压不能达到压紧效果，需要对毛坯进一步处理，加工该工件就需要三次装夹。<br>通过加工时遇到的一个个问题，对加工工艺设置的参数进行了一步步的完善，加工的最后阶段切断时还发现，要对毛坯放置一个压板限制住工件离开毛坯后的z向移动，在加工完成后对工件进行尺寸检测，发现检测结果符合尺寸要求。<br><br>关键词：结构分析；加工工艺；装夹方案；专用夹具；检测

This paper mainly introduces the modeling, process analysis and manufacturing process of the special port plate of the inclined shaft axial piston pump. When analyzing the process of the port plate, the structure of the port plate is used to analyze the processing technology of the workpiece. There are many processing technologies of the workpiece. The most efficient one is used in this paper. The core content of this paper is the three-dimensional modeling, structure analysis and installation of the port plate Through the combination of economic benefits and quality benefits, the valve plate is processed.<br>When exploring the clamping scheme of workpiece, it is found that if you want to process the workpiece, the general fixture is not competent, and only the special fixture is designed and processed, you can carry out positioning processing. When extending the thinking, for this valve plate, one clamping can not be successfully processed, and in the second clamping, it is found that the pressing effect of Z-direction can not be achieved only through air pressure, so it is necessary to further the blank Processing, processing the workpiece requires three clamping.<br>Through the problems encountered in the processing, the parameters set in the processing technology are improved step by step. In the final stage of the processing, it is also found that a pressing plate should be placed on the blank to restrict the z-direction movement of the workpiece after leaving the blank. After the processing, the size of the workpiece is tested, and it is found that the test results meet the size requirements.<br>Key words: structural analysis; processing technology; clamping scheme; special fixture; inspection<br>