2、7月保险杠二次复检故障率2%（不含底材），7月起将角板纳入涂装二次

2. In July, the failure rate of the second re-inspection of bumpers was 2% (excluding the substrate). Starting from July, the gusset was included in the second re-inspection of the coating. The current failure rate is 21%. There are scratches on the corners and edges, under the respective coatings and the inner plate of the angle plate, which need to be controlled by the coating department; <br>3. The current scratches on the color parts are mainly concentrated on the edges and a small part of the surface and corners, and the coating department needs to focus on Management and control to reduce the retention of problematic parts; as of July 19, there is no obvious trend of improvement in the substrate problem of color parts, and it is necessary for the purchasing department to strengthen the control of parts and substrates;

2. In July, the failure rate of the second re inspection of the bumper was 2% (excluding the substrate). Since July, the corner plate has been included in the second re inspection of the coating. At present, the failure rate is 21%. Most of the corner plate scratches are concentrated in the corners and edges. There are scratches under the film coating and the inner plate of the corner plate, which need to be controlled by the coating department;<br>3. At present, the scratches of various color parts are mainly concentrated on the edges and a small part of the surfaces and corners, which need to be controlled by the coating department to reduce the retention of problem parts; As of July 19, there was no obvious positive trend in the substrate problem of color parts, and the procurement department needs to strengthen the control of parts substrate;<br>

2. In July, the failure rate of bumper re-inspection was 2% (excluding the substrate). Since July, the corner plate has been included in the second re-inspection of painting. At present, the failure rate is 21%. Most of the corner plate scratches are concentrated in the corners and edges, and there are scratches under the respective film coating and the inner plate of the corner plate, which need to be controlled by the painting department;3. At present, the scratches of various color parts are mainly concentrated on the edge and a small part of the surface and corner, which needs to be controlled by the coating department to reduce the problem parts; As of July 19, the problem of color parts substrate has no obvious positive trend, so it is necessary for the purchasing department to strengthen the control of parts substrate;