HORIZONTAL COMPRESSION / CLAMP: Exe

HORIZONTAL COMPRESSION / CLAMP: Exempt Scenario 1 = [Nails, Screws, Wire, Chain, Tile (all types), flooring] AND [Not contained in a Side Stack] AND [Weight ≤ 140 lb] All (3) conditions must be met to qualify as exempt. If exempt, rate all test lines under HORIZONTAL COMPRESSION/CLAMP Section as N/A. Exempt Scenario 2 = [TAT/holiday products, Mirrors, Doors shipped vertically] AND [Weight ≤ 140 lb] Both conditions must be met to qualify as exempt. If exempt, rate all test lines under HORIZONTAL COMPRESSION/CLAMP Section as N/A. [Width dimension between clamps] With the correct surface down, conduct Width compression/clamp testing if:1. [The product is NOT exempt]AND2. [Weight ≥ 70 lb] OR [Volume ≥ 7 ft³]AND3. [Height ≥ 11 in]AND4. [22in ≤ Width ≤ 78in]OR5. Carton is marked with [Clamp] Icon on the width vertical surface which is visible when approached by the clamp truck operator DO NOT follow vendor’s stated [No] clamping instructions EXCEPT for kitchen appliance or air conditioners > 7 ft³ or > 70 lb. which shall be tested according to icons as received. If kitchen appliance or air conditioners > 7 ft³ or > 70 lb. does not indicate that at least one dimension is able to be clamped, test the length dimension here. Apply 1000 lb force (if kitchen or bath cabinet apply 1800 lb force). Hold for 1 minute.• Clamp fixture must not engage more than 54 horizontal inches of the package surfaces to be clamped.• Must use hydraulic fixture if available. Shall be no major defects / no breaks in or crushing of the packaging. Shall be no damage to product contained within packaging.