1、经过近一周的问题分析和临时措施监督，车门开启拉杆的装配已得到有效控

1. After nearly a week of problem analysis and supervision of temporary measures, the assembly of the door opening rod has been effectively controlled; <br>2. New problem point: the sealing rubber ring of the door controller wiring harness connection terminal does not match the plugging position (the size requirements are not in the drawing Mark, need to be verified by R&D); the door controller harness interferes with the edge of the sheet metal, which will affect the opening and closing function of the door after being worn, and there is a risk of burning, so R&D optimization is required.

1, after nearly a week of problem analysis and temporary measures supervision, door opening lever assembly has been effectively controlled;<br>2, the new problem point: door controller harness connection terminal sealing ring and plug position does not match (size requirements drawings are not marked, need to be verified by R and D);

1. After nearly a week of problem analysis and supervision of temporary measures, the assembly of door opening pull rod has been effectively controlled;<br>2. New problems: the sealing rubber ring of the wiring harness connection terminal of the door controller does not match with the plug-in position (the size requirement is not indicated in the drawing, which needs to be verified by R & D); the wire harness of the door controller interferes with the edge of the sheet metal, which will affect the opening and closing function of the door after wear, and there is a risk of burning the car, which needs R & D optimization.<br>