两组电影操作时辐射强度采集点阵获取的辐射数据绘制成辐射强度曲面图，分别

The radiation data acquired by the radiation intensity acquisition lattice during the two sets of film operations are drawn into radiation intensity surface maps, as shown in Figure 2 and Figure 3, respectively. The results are listed in Table 2. Comparing before and after using the safety cabin, there were statistically significant differences in the radiation intensity collected on the left plane, right plane, foot plane, head and face, and gonads (Z=-6.645, -5.615, -6.204, -2.647, -2.882 , P

The radiation data obtained from the radiation intensity acquisition dot matrix during the operation of the two groups of films are drawn into the radiation intensity surface diagram, as shown in Fig. 2 and Fig. 3 respectively. The results are listed in Table 2. There was significant difference in the radiation intensity collected from the left plane, the right plane, the foot plane, the head and face and the gonad before and after the use of the safety cabin (z = -6.645, -5.615, -6.204, -2.647, -2.882, P

The radiation data acquired by the two groups of radiation intensity acquisition dot matrix during movie operation are drawn into the radiation intensity surface graph, as shown in Figure 2 and Figure 3 respectively. The results are listed in Table 2. Before and after using the safe cabin, there were statistically significant differences in the data collected from the left plane, the right plane, the foot plane, the head and face and the gonad (Z=-6.645, -5.615, -6.204, -2.647, -2.882, P