Wiping is done automatically by an

Wiping is done automatically by an automatic wiper within a predetermined interval of 4 hours, or by manually drawing a wiper lever in the UV reactor body. Conditions for UV system to be put into Operation In order for the ultraviolet system to function properly, the following conditions must be met: Filter signal (operation of filter pump) The temperature of UV reactor is below 60 ℃. The UV box temperature is below 60 °C. Cooling indicator off (after overheating, MUV lights ignition failure or after lights off) Working hours of the MUV lamp do not exceed (9,000 hours) Only when there is water flowing through the UV line room, UV system can operate! HymaticAGE UV unique Technology The estimated Hymatic for MUV lamps installed in the MUV system is 6,000 hours (if the operation is not interrupted). To keep the lamps and lanterns going on for such a long time, the UV system is equipped with a unique HymaticAGE control system throughout the Hymatictime. of the MUV lamp Note: the frequent turn-off and turn-on of MUV lights shorten its Hymatic time. If the lamp no longer works, the red UV fault indicator on the LED monitor will turn on. It is also recommended to replace the MUV lamp when the treated water quality is no longer sufficient at the end of the WATNICSTIME of the MUV lamp due to the reduced UV radiation intensity. Control system。 Button indicator and Featur