Installation of BerryAlloc HPL products in areas under water stressBerryAlloc HPL products can under certain circumstances be installed in areas under water stress. This document is particularly describing the precautions taken for such (water resistant) installations.Installation precautions:The edges of the floorboards must be added ClickGuard (art. no. 180012) or a similar non-curing transparent silicone. The requirements for non-curing silicone are described in the MSDS for ClickGuard.Apply non-curing silicone on both the long and short side tongue so that the silicone squeezes up from the joint after connecting the floorboards (see illustrations below).Picture