抗爆墙 抗爆构造措施：1、墙体沿墙长方向每2~3m设构造柱，并沿墙体高

抗爆墙 抗爆构造措施：1、墙体沿墙长方向每2~3m设构造柱，并沿墙体高度方向每隔500mm设置2∅10钢筋与承重墙或结构柱拉结，拉结钢筋沿墙全厂贯通。 2、沿墙高度方向2~3m左右设置混凝土圈梁，圈梁与承重墙或结构柱拉结。

Anti explosion structural measures of anti explosion wall: 1. Structural columns are set every 2 ~ 3M along the wall length, and 2 ∅ 10 reinforcement is set every 500mm along the wall height to tie with the bearing wall or structural column, and the tie reinforcement runs through the whole plant along the wall. 2. Concrete ring beam shall be set about 2 ~ 3M along the height direction of the wall, and the ring beam shall be connected with the bearing wall or structural column.<br>

Anti-explosion structural measures of anti-explosion wall: 1. Structural columns shall be set every 2~3m along the wall length direction, and 210 steel bars shall be set every 500mm along the wall height direction to tie with the load-bearing wall or structural columns, and the tie bars shall run through the whole plant along the wall. 2. Set concrete ring beams along the height direction of the wall about 2~3m, and tie the ring beams with load-bearing walls or structural columns.