然后履带吊行走至基础旁边固定起吊位置后，直接将定子吊起，定子离地200

Then the crawler crane walks to the fixed lifting position next to the foundation, and directly lifts the stator. After the stator is 200mm off the ground, stop lifting the hook, check the stator hoisting rope and all parts of the crawler crane, and after confirming that there is no abnormality, continue to lift the hook so that the bottom elevation of the stator exceeds After 15.8 meters, the hook is stopped, and then the crawler crane adjusts the stator to a position where it can be positioned by turning the rod to the left, the lying rod, and other adjustments.

然后履带吊行走至基础旁边固定起吊位置后，直接将定子吊起，定子离地200mm后，停止起钩，检查定子吊装绳索及履带吊各部，确认无异常后，继续起钩使定子底部标高超过15.8米后停止起钩，接着履带吊通过向左转杆、趴杆等调整将定子调整到可以就位的位置。

Then, after the crawler crane moves to the fixed lifting position beside the foundation, directly lift the stator. When the stator is 200 mm above the ground, stop the hook lifting, check the hoisting rope of the stator and all parts of the crawler crane. After confirming that there is no abnormality, continue to lift the hook until the bottom elevation of the stator exceeds 15.8 M. then, the crawler crane adjusts the stator to the position that can be put in place by adjusting the left turning rod and the bending pole.<br>