卡箍生产1. 取作业指导书放在工具桌前，确认模具状况；2. 领取合格模

Production clamp <br>1. Take the operating instructions on the tool table, confirm status mold; <br>2. the mold to receive a passing machine edge; <br>3. disposed to receive material and feeding mechanism; <br>4. Turn on the power switch, and setting the molding speed (frequency), the fixed length adjusting screw will be good and the locking screw feed length; <br>5. stationary mold mounted on the machine, the material is introduced into a mold; (per plate feed material removal head 0.8-1.2 m) <br>6. debugging jog feed mode, cutting knives, molding knives, jog whole process of production of parts, self-qualified; <br>7. turn on the automatic production of molded test switch parts 100, respectively, to make the first heat treatment and III test specimen; <br>8. mass, with tipping part totes to heal and predetermined parts by weight, moved the pallet, stacked five high limit;

Clamp production<br>1. Take the work instructions and put it at the tool table to confirm the mold condition;<br>2. Pick qualified mold to the machine side;<br>3. Collect ingress materials and place them in the materials agency;<br>4. Turn on the power switch, set the molding speed (frequency), adjust the length of the fixed screw to determine the feed length and lock the screw;<br>5. The mold is machine-fixed and the material is introduced into the mold; (0.8-1.2 m per plate of material removal head)<br>6. Point-on commissioning material mold, cut-off knife, molding knife, tap the whole process of production parts, self-test qualified;<br>7. Turn on the automatic molding switch test production of 100 parts, respectively, to do the first three inspection and heat treatment inspection;<br>8. Mass production, with the swing box to the specified weight and smoothing parts, moved to the pallet, stacking five storeys high;

Clamp production<br>1. Take the operation instruction and put it in front of the tool table to confirm the mold condition;<br>2. Get the qualified mold to the machine platform;<br>3. Collect materials and place them in the feeding mechanism;<br>4. Turn on the power switch, set the molding speed (frequency), adjust the fixed length screw to set the feeding length and lock the screw;<br>5. The mold is fixed by the machine, and the material is introduced into the mold; (0.8-1.2m material removal head per plate)<br>6. The parts produced in the whole process of inching adjustment test mold, cutting knife, forming knife and inching are qualified by self inspection;<br>7. Start the automatic forming switch to trial produce 100 parts, and conduct the first three inspections and heat treatment inspections respectively;<br>8. For mass production, use turnover box to connect and load parts to the specified weight and flatten parts, move them to tray, and stack them up to five layers;