3.4.1 Automatic address assignment with the AVS® 370Within an AVS 370 module, the ViscoPump inserts are automatically populated based on their positions at the addresses 1 (first slot) to 4 (fourth slot).When using an additional AVS 370 module, this address must be moved by moving a jumper, so that the addresses 5 to 8 are allocated in this module.All other sizes (burettes. AVS 350. AVS 360) must be set to a unique address manually.Please check the instructions for use of the respective devices The WinVisco software expects viscosity measurement devices in the address zone 1 to 8 (ViscoPump, AVS 350, AVS 360). Burettes are expected in the address range 9 to 15 and at address 0.