三、钢筋安装1.墙板钢筋施工墙板的水平筋下料不宜过长，以利于钢筋绑扎，

3. Reinforcing steel installation <br>1. Wall panel steel reinforcement construction <br>The horizontal reinforcement of the wall panel should not be too long to facilitate the tying of the steel bars. The bending and fishing of the steel bars should be directed into the concrete during tying. The lap position and length requirements of the vertical steel bars should be designed according to the design Requirements and specifications. The wall reinforcement should be tied point by point, and draw hooks should be set between the two rows of steel bars. The draw hooks should hook the outermost ribs and be made into 45-degree or 135-degree curved hooks. The draw hooks are arranged at the spacing required by the design and laid in a plum blossom shape.

Third, rebar installation<br>1. Wall plate rebar construction<br>The horizontal rebar of the wall plate should not be too long, in order to benefit the steel bar tie, when the steel bar bending fishing should be towards the concrete, vertical rebar lifting position and length requirements should be carried out in accordance with the design requirements and specifications. Wall ribs should be tied point by point, two rows of steel between the pull hook, pull hook should hook the outerest rib, and make 45 degrees or 135 degrees hook, pull hook according to the design requirements of the spacing arrangement, a plum-shaped arrangement.

3、 Reinforcement installation<br>1. Reinforcement construction of wallboard<br>The blanking of horizontal reinforcement of wall panel should not be too long to facilitate the binding of reinforcement. When binding, the bending hook of steel bar should be towards the concrete, and the overlapping position and length of vertical reinforcement should be in accordance with the design requirements and specification requirements. The wall reinforcement shall be bound point by point, and a hook shall be set between the two rows of reinforcement. The hook shall hook the outermost reinforcement and make it into a 45 degree or 135 degree hook. The pull hook shall be arranged according to the design requirements and shall be erected in a plum blossom shape.<br>