整套系统可自动操作，设备各部件按预先编好的程序进行顺序运行；也可手动控

The entire system can automatically operate the device for operating the components according to pre-programmed sequence; may be controlled manually, to facilitate adjustment of the equipment commissioning: At this point the operator can start the order of the functional components, may not be in sequence individual features (e.g. lift) of jog operation, in order to test the performance of, the relevant parts of the operation and the like. The electrical system of the machine has the following features: <br>blasting with brake interlock for pills, shot blasting is not open, the shutter open for pellets <br>polishing head equipped with foolproof open switch, open the top cover blasting, shot blasting open <br>with projectile circulatory system failure alarm, and a member of any of the systems fails, it automatically stops the above components, to prevent the projectile stuck power plant and burned.

The entire system can be operated automatically, the parts of the equipment are run sequentially according to pre-programmed procedures, and manual control can be made to facilitate the adjustment of the equipment by the debug personnel: at this time, the operator can start the functions in sequence, or the individual function parts (e.g. lifters) can be taped in order to test the performance of the relevant components, operating conditions, etc. The electrical system of this machine has the following characteristics:<br>The projectile is interlocked with the pill gate, the projectile does not open, the pill gate cannot open<br>The throwhead is equipped with an anti-error switch, the top cover of the blaster is open, and the blaster cannot be opened<br>The projectile cycle system fault alarm function is provided, and any part of the system fails, the above part automatically stops running, the bulletproof pellet stoistands and burns the power unit.

The whole system can be operated automatically, and each part of the equipment can be operated in sequence according to the pre programmed program; it can also be controlled manually, so that the debugging personnel can adjust the equipment: at this time, the operator can start each functional part in sequence, or can jog the single functional part (such as the elevator) in order to test the performance and operation of each relevant part. The electrical system of this machine has the following characteristics:<br>The shot blasting device and the shot supply gate are interlocked. The shot blasting device cannot be opened, and the shot supply gate cannot be opened<br>The throwing head is equipped with anti misoperation switch, the top cover of the shot blasting machine is opened, and the shot blasting machine cannot be opened<br>It is equipped with the fault alarm function of the bullet circulation system, and if any part of the system fails, the parts on it will automatically stop running, so as to prevent the bullet from blocking and burning the power device.<br>